Friday, 29 April 2016

A Handpicked Lapped Zipper

A handpicked lapped zip, with added button loop closure. Now as complicated as that sounds, it really is probably easier to do than say!
 
This is the closure used on most wedding dresses, if they don’t have a corset back. It gives an inconspicuous finish, whilst also making a decorative feature of the seam.
I had always intended to do a lapped zip for my dress, but it got steadily more complicated as I decided to add covered buttons and loops. The back neckline already brings the attention to the centre back seam, so I thought why not really make it a feature!
I have little experience with lapped zips, but after doing this one they will definitely be my go to option. Invisible zips are usually called for in most patterns, but I find them fiddly and they can be a right pain to do up. Doing a handpicked lapped zip is not much different except the last step is completed by hand with a prick stitch. Now I’m not going to explain a lapped zip, as there are plenty of tutorials out there…. So here are the ones I found most useful.
 
 
As you can see..(or hopefully not see!) using a prick stitch means the line of stitching that creates the lap is very almost invisible, particularly in a textured fabric like silk dupion.
When it came to adding buttons and loops… no amount of googling would yield much in the way of useful information, so here are a few of the most useful bits I gleaned through books, the web and a seamstress friend.
 
  • The loops will go on the right side of the zip, when looking at it. This felt the wrong way to me, but you want the lapped part of the zipper to be kept flat, so putting the loops on the other side and buttons on the lap pulls it over and flush against the body.
  • Use elastic loops. I had looked at silk loops, but without stretch they would be more difficult to do up, and wouldn’t pull the lapped part of the zipper over as the elastic ones do.
  • The loop tape has to be added before sewing in the zip. Prepare the seams, sew in or iron on your interfacing and then press the seam allowance in on each side. Place the loop tape on the underside of the right hand side of the seam with the loops poking out behind the fold. Tack it in, then pin and sew in the zip. So the loop tape is sandwiched between the main fabric and the zip. It can be quite an effort to sew over that many layers though.
  • The lining is not involved in the zip process at all, until the end when I slip stitched it down to the back of the zip, trimming down the lapped side first.
 
I bought my loop tape from an eBay seller for just a couple of quid. The buttons I splashed out on and ordered from bridalbuttons.co.uk. Mine are 11mm handwoven dupion covered, almost an exact match to my main fabric, but they also cover buttons in your specific fabric if you send them some.
So there you have it, hopefully I’ve been a small help if you decide to do a handpicked lapped zip with added buttons and loops, or at the very least not confused you further!
I’m going to do another post to outline the other finishing touches of my dress, such as the hem and the scallop lace edging, so stay tuned for that…
Emily Kate.
 

No comments:

Post a Comment

say hello...